ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH 
WILL BE UNINTERRUPTED OR ERROR-FREE. 

//**************************************************************** 
readme_patch_9.1_2.08.txt 
Readme file for Quartus II 9.1 Patch 2.08 
Copyright (C) Altera Corporation 2010 All right reserved. 
Patch created on April 07 2010
Patch SPR#: 335857 
SPRs fixed: 336901 
//**************************************************************** 

 This patch enables the configuration / programming file generation for Cyclone III LS EP3CLS100 and EP3CLS70 devices.


Note:  
      This patch needs the following INI variable(s) to be able to work: 

           quartus_ini_variable_replace_me = on 
	
      # Password to enable SOF generation for EP3CLS100 in 9.1 SP2

      dev_password1 = e81f0e65b8a4525c02d83d92e3faecfb8eeae91c22006412d38c6e3faecfb84ba490110043422352352752277555301500052425533354205420530053015000551655


      # Password to enable SOF generation for EP3CLS70 in 9.1 SP2

      dev_password2 = e81f0e65b8a4525c02d83b994c8843892198e2e5f8f1d0d7749d94c8843898492e011004342235235275227755211522142056532344201020152052115221455165


      Please put the INI variable statement(s) in the "quartus.ini" file, and put the file into your project directory. 


Caution - You must either have previously installed the Quartus II 
          software version 9.1 SP2 or must install the Quartus II 
          software version 9.1 SP2 before installing this patch. 
          Otherwise, the patch will not be installed correctly and 
          the Quartus II software will not run properly.