Steps to configure Tri-Mode Intel® RAID Controllers in pre-boot environment There is no prompt during system POST to access/open the RAID BIOS Option ROM configuration utility. Follow the steps below to configure the Tri-Mode Intel® RAID Controllers in pre-boot environment: Your system must be configured in UEFI boot mode. There is no built-in configuration utility for the Tri-Mode controllers when the system is configured for legacy boot mode. Configuring your Intel® RAID Product in Pre-boot Environment How do I Set up the Tri-Mode Controllers for NVMe*/SAS/SATA Modes?How to Access the RAID BIOS During POST for the Tri-Mode Intel® RAID Controllers
Note
Related articles
Related Products
This article applies to 12 products
在開機前環境中Intel® RAID三種模式控制器的步驟
請按照以下步驟在開機前環境中Intel® RAID三種模式控制器:
注意 |
您的系統必須配置 在 UEFI 開機模式。在將系統組態為舊式開機模式時,三種模式控制器沒有內建的配置公用程式。 |
- 啟動 系統。
- 按下 F2 鍵進入 BIOS 設定。
- 流覽 至 Advanced -> PCI Configuration -> UEFI 選項 ROM 控制項。
- 在儲存控制器 下,選擇 您的三種模式Intel® RAID Controller。